NewsCurrent Location：Products >> News>> Company News

P79.Z200S/K86-D 1 Axis Z High-Precision Piezo Microscope Scanner with Holder

Update time：2024-08-16 15:33:55Clicks：771second

P79.Z200S/K86-D piezo microscope scanner is specially designed for microscopic imaging structures. It can be conbined with macro & micro scanner and piezo motor platforms to perform Z-direction capture and rapid focusing. Its Z-motion travel range is 200μm, and the max load capacity is 1.5kg, and it can be mounted horizontally, vertically and invertedly. For easy sample access, the special holder is designed to be compatible with petri dishes with diameters from 30mm to 60mm (1.18 in to 2.36 in) or slides with widths from 25mm to 26.5mm (0.98 in to 1.04 in). It has a high positioning accuracy, and the closed-loop repeatability is up to 0.1%F.S. It can be used for sample localization in a variety of microscopes or imaging techniques. It is shown as the following figure.

Characteristics

Z motion travel to 200μm

Load capacity to 1.5kg

Closed-loop repeatability up to 0.1%F.S.

Aperture size 86.5mm×128.5mm

Custom sample holder for easy access

Open/closed loop version, UHV version available

Application

Fluorescence

Confocal microscopy

3D imaging

Autofocus system

Sample detection

Technical Data

Model	P79.Z200S/K86-D
Active axis	Z
Drive control	1 driving channel, 1 sensing channel
Travel range(0~120V)	160μm
Travel range(0~150V)	200μm
Sensor	SGS/-
Aperture	86.5mm×128.5mm
Closed/open loop Resolution	6nm/2nm
Closed loop linearity	0.15%F.S./-
Closed loop repeatability	0.1%F.S./-
Stiffness	0.2N/μm
Unloaded resonant frequency	100Hz
Closed/open loop step time	-/5ms
Load capacity	Horizontal: 1.5kg Vertical: 0.05kg Inverted: 0.2kg
El. capacitance	21.6μF
Material	Steel, Al
Mass	770g

Recomended Controller

E53.D controller is ideal for driving the P79.Z200S/K86-D piezo microscope scanner. E53.D is a small-size, high-power, low-power consumption, high-bandwidth, low-ripple, single-channel piezo ceramic controller. Bandwidth up to 10kHz, power supply voltage 24VDC1.5A. The controller adopts a special operational amplifier circuit to ensure the output capacity of high voltage and high current, and improves the precision and stability of PI regulation and control by optimizing the sensing servo module. The reliable anti-interference design ensures the high frequency response speed of the controller. The overall size is only 148×27.5×80mm^3, the weight is about 350g, It has a cooling area, which can quickly export the generated heat. The upper computer software supports secondary development, which is very suitable for integration into industrial equipment applications.

Previous article：CoreMorrow Compact Linear Piezo Motor, Travel Range up to 21mm
Next article：P60.X200 1-Axis High-Precision Nanopositioning Stage For Optical Measurement

WeChat

Sweep, get the latest information on core tomorrow

Address：1F, Building I2, No.191 Xuefu Road, Nangang District, Harbin, China

Products

Applications

Services

News

About CoreMorrow

Contact

P79.Z200S/K86-D 1 Axis Z High-Precision Piezo Microscope Scanner with Holder

WeChat

Sweep, get the latest information on core tomorrow

Address：1F, Building I2, No.191 Xuefu Road, Nangang District, Harbin, China

Tel：0451-86268790

Piezo · Nano · Motion