E53.C4K series piezoelectric controller is designed for driving linear piezo motor (piezo screw drivers) and piezoelectric lens adjustment frames. It has 4 channels and could drive 4 piezo motors. E53.C4K piezoelectric controller is controlled by the computer software and can be connected to the piezoelectric motor through the network port.
Features
• For linear piezo motor
• Driving 4pcs piezo motor
• Software control
• 24VDC/1A power supply
Front Panel
① Power indicator, Green, lights when power's on
② USB port, MicroUSB port
③ RS-232/422, See interface pin definition
④ Piezo motor connector 1
⑤ Piezo motor connector 2
⑥ Piezo motor connector 3
⑦ Piezo motor connector 4
RS-232/422 interface pin definition
Rear Panel
① Power switch
② Power interface 24VDC
Parameter
Mode: E53.C4K-H1
Power supply: 24VDC/1A(20V~30V)
Static power: <5W
Processor: 32bit 168MHz
D/A converter: 16bit
Communication interface: USB, RS-422, RS-232
Input voltage: 0~10V
Output voltage: 0~120V( optional 0~150V)
Peak current: 1A
Ave. current: 60mA
Bandwidth: 10kHz
Ripple: 10mVpp (@2.2μF)
Output power: 9W
Operating temperature: 0~50℃
Output short circuit current: 60mA
Piezo motor connector: RJ11
Communication connector: DB9, MicroUSB
Dimension: 150×80×27.5mm3
Mass: 0.36kg